Air Conditioning Radiator Recycling Machine

In our daily life, we often encounter waste copper and aluminium radiators from the disposal of cars and the replacement of indoor air conditioners.

SUNY GROUP's radiator recycling and separation plants use new technology to achieve a 99% metal recovery rate. Depending on the material, different treatment plants can be selected and their processes are different.

1) Radiator recovery and separation equipment process

The process can be mixed for more difficult to handle heat sinks, the waste heat sink is first shredded and crushed, and then sorted out by an airflow specific gravity sorter for the lighter aluminium elements;

The magnetic separator is then used to sort out the iron and copper elements, resulting in a high purity metal material for secondary recycling.

2) Radiator stripping machine process

The heat sink stripping machine is a kind of separation of copper tubes and aluminium foil for waste air conditioning radiators and end-of-life car cooling water tanks.

Mainly for relatively flat not subject to damage bending heat sink cutting separation, it is different from the heat sink recycling equipment, heat sink stripping machine can be scrap copper and aluminium air conditioning radiator internal copper tube complete stripping out, aluminium foil also maintain the block, in the same stage can handle single and double 19mm, 21mm, 25mm three different steel tube spacing of copper and aluminium heat sink, separation speed is relatively fast However, only small, flat radiators can be processed.

In addition, the technical staff of Dongying adopt the safety aspect of the heat sink stripping machine by setting the light eye control at the inlet, the worker's hand reaches over to set the position and the machine runs to stop, which is a very safe protective equipment.

If the operation of the heat sink stripping machine in order to make the feed more accurate, can be equipped with auxiliary equipment heat sink cutting machine.

The pre-set feed size for the heat sink stripper allows extra wide heat sinks to be cut and processed to achieve higher economic efficiency.

The above two methods can be used for the effective recycling of copper and aluminium radiators, customers need to choose according to their own needs targeted procurement of the corresponding equipment, if you have questions or problems, you can always contact us message.