1. Inlet wheel: conveying wire and stripping wire end. When stripping short wires, the stripping machine has both stripping head and stripping tail (wire length less than 50mm). In addition to the stripping head, it also has the function of stripping the middle parts when stripping.

2. Outlet wheel: convey the wire for the wire stripping machine and strip the wire tail. (The wire stripping machine has no effect when stripping short wires, so you need to make the "outlet wheel raise the knob" at the "u" position)

3. Inlet wheel gap adjustment knob: adjust the wire inlet wheel gap of the wire stripping machine, turning upward to increase the gap, turning down to decrease the gap (adjust according to the thickness of the wire).

Cable Stripping Machine

4. The pressure adjustment knob of the wire inlet wheel of the wire stripping machine: Adjust the pressure of the wire inlet wheel of the wire stripper. After pulling it out, rotate it clockwise, the pressure of the inlet wheel will increase, and rotate it counterclockwise after pulling out, and the pressure of the inlet wheel will decrease. (Determined according to the strength of the wire skin, that is, the difficulty of stripping the wire, the pressure will increase if it is difficult, and the pressure will decrease if it is easy)

5. Raise the knob of the inlet wheel: when the wire stripper is threading, raise the inlet wheel, turn the knob clockwise to raise the inlet wheel so that the wire can be passed smoothly; when working, lower the inlet wheel and turn the knob counterclockwise to lower it. Into the wire wheel, press the wire.

6. Outlet wheel gap adjustment knob: adjust the outlet wheel gap for the wire stripping machine. Rotate upwards to increase the gap, and downwards to decrease the gap (adjust according to the thickness of the wire).

7. Outlet wheel pressure adjustment knob: adjust the outlet wheel pressure for the wire stripping machine. After pulling it out, turn it counterclockwise, the outlet wheel pressure will increase, and turn clockwise after pulling out, and the inlet wheel pressure will decrease. (Determined according to the strength of the wire skin, that is, the difficulty of stripping the wire skin of the wire stripping machine, the pressure will increase if it is difficult, and the pressure will decrease if it is easy)

8. Lifting knob of outlet wheel: Lift up the outlet wheel when taking out the wire, turn the knob counterclockwise to raise the outlet wheel so that the wire can be taken out smoothly; lower the outlet wheel when working, and turn the knob clockwise to lower the outlet wheel. (When using short stripping program, the outlet wheel should be raised)

9. Knife holder assembly: in the wire stripping machine, it is responsible for the cutting, stripping and tailing of the wire. When the machine is stopped, the upper and lower blades must be opened to the maximum, so that the wire can pass the cutter smoothly.