When understanding the usage and precautions of the wire stripping machine, we should first correctly distinguish which kind of wire stripping machine belongs to?

Cable Stripping Machine

1. How to use the semi-automatic coaxial cable stripping machine: first turn on the power and set the parameters (line length, stripping length, total number, fixed number, speed, etc.) according to the processing requirements. Push the wire to be processed through the foolproof jig on the cover of the knife holder until it is against the closed opening of the blade. The sensor will automatically issue a command to the wire clamping device to automatically clamp the cable, and the stripping knife head will start rotating and stripping. Take out the wire.

Note: Before mass production, you must try to strip a few wires to check whether they meet the requirements of the drawing, whether there are unclean, peeling skin, inner core, peeling and other undesirable phenomena. After the production is completed, the power supply should be cut off in time. Clean up the desktop and machine.

2. How to use the automatic coaxial cable stripping machine: first check whether the power is turned on, then put the wire delivered by the wire feeder into the wire straight, and then press the feeding command on the screen, the wire will be transported by the pendulum wheel Go to the rotating knife holder for the first circular cutting, and then send the wire to the material nozzle through the inlet bearing to the V-shaped knife holder to start the process of stripping. After the stripping is completed, the stripped wire harness will be sent out through the outlet through the outlet wheel bearing.

Note: Please refuel the operating parts of the machine regularly to extend the life of the machine. When cleaning up the waste after each production, do not blow into the machine to prevent waste from entering the inside of the machine. The waste at the blade cannot be blown off. , Please use toothpicks or glue sticks to peel off to prevent blade damage.