What are the methods to recycle end-of-life motors?

In life, we will encounter many kinds of scrap motors, and motor dismantling machine has become the dismantling equipment for some washing machine motors, air conditioning compressor motors and other scrap motors around us. Cutting, copper wire is pulled out from the other end of the stator with a copper pulling machine, and the silicon steel sheet and copper wire are recycled and reused by the motor factory. There are three common methods of recycling end-of-life motors.

1, the traditional disassembly is to use a chisel and hammer to cut the coil from both ends of the stator, and then use a steel drill to crush the wire in the slot. This method is simple and crude, and is not conducive to recycling.

2. Mechanical disassembly is done by professional equipment. This operation involves placing the used motor stator on the turntable of the equipment, then cutting the coils with professional cutting equipment, and then fixing the stator on the workbench. The tensioning device consists of a wire rope and a motor at the end of the coil, which is pulled by a hook to pull it out of the stator slot with each pull of the coil. Convenient, simple, improve work efficiency, reduce workload, while increasing the value of used engines.

3, electric copper pulling machine, safe and fast, no waste. Because copper pulling motor machine fully pursue efficiency, so the future market is an efficient market. If you can not keep up with the pace of the market, you will naturally not be eliminated. , because only by constantly improving efficiency can you seize market share. the development of AI intelligence has further promoted the self-service dismantling machine to become the main force in the motor dismantling industry, the new Peng motor dismantling-motor pulling copper machine 2022 has just been updated to fully meet the market demand in today's competitive times.

Motor dismantling machine is the motor rotor and coil separation, recycling scrap motor, let the motor for separation work, will be inside the copper wire and silicon steel piece separate, so as to achieve the crushing process of equipment. and separation. Motor dismantling machine is generally divided into two pieces of equipment, a copper cutting machine and a copper pulling machine, both using the principle of hydraulic pressure, mainly used to dismantle the copper wire and silicon steel pieces in the stator of the motor. Among them, the copper cutting machine is used to cut the copper wire at one end of the motor stator, while the hydraulic copper pulling machine is used to pull out the copper wire from the other end of the truncated motor stator. Application of motor dismantling machine: mainly copper shearing machine (cut off a copper wire of the motor stator) with hydraulic copper pulling machine to recover the copper wire in the motor stator.

Motor dismantling equipment instead of manual dismantling of used motor stator or end-of-life motor stator can achieve the purpose of using copper coils (enameled wire) and stator iron core (silicon steel sheet). The recovered copper coils (enameled wire) and stator iron core (silicon steel sheet) should also be used twice to avoid material waste.

The above is the introduction of the recycling method of waste motor, if you need, welcome to contact us at any time.