Working principle and precautions of waste cable stripping machine

The recycling of waste cables is beneficial to the environment and the enterprise, but the previous manual recycling not only has a large workload and low efficiency, but also cannot achieve fast and effective recycling of cables, and the waste cable stripping machine is this. Special purpose machinery.

Waste Cable Stripping Machine

Working principle of waste cable stripping machine

Before starting to separate and recycle the surface layer of the waste cable from the inner core, the street of the cable should be cut off to ensure the long-term durability of the blade, and then start feeding. The cut waste cable is sent to the drum, and the inner core and the outer layer begin to separate through the strong extrusion force of the drum, and then the personnel begin to tell that the outer layer and inner core are sorted and tied. This is the complete working principle of the waste cable stripping machine. .

Precautions for waste cable stripping machine

1. Note that the blade should not be too sharp, so as not to damage the inner core, and pay attention to setting the position of the blade according to different cables.

2. Pay attention to check whether the position is wrong when feeding.

3. Pay attention to whether the pressure of the springs on both sides is too tight, too tight will cause the cable to not pass.

The above is the relevant introduction of waste wire and cable stripping machine recycling equipment. As a professional solid waste recycling equipment manufacturer, Suny Group has rich experience and perfect technical equipment and after-sales service. If you have relevant needs, please feel free to contact Contact us.